Spade RBA

Spade RBA by Blackrose

“The Spade RBA” bridge is produced and processed in a very unique manner. First of all, let’s talk about the beauty of the overall appearance of the bridge itself. Ring (Dual snap negative connection) The beauty ring not only serves the purpose to make the outer look appearance beautiful but on the other hand, it also contributes to the performance of the bridge itself by being the 2nd negative connection to the bridge and how is that possible? The 1st connection will be through the chimney to the top cap section by the threads and the 2nd connection is that the ring is being sandwiched tightly in between the chimney and the top cap sitting firmly on the top surface of the top cap.

Deck (Clamp Mechanism)
The deck has a unique clamp mechanism where it allows the wire to settle on the deck easily below the clamps. Once set, you can simply cut the wires off and hide them right behind the recessed area of the clamps. These features are very important as I find to keep users away from the struggle to get the wires cut off and to avoid shorting issues touching the top cap.

Finishing The spade bridge is extremely compact and the deck surface to the top cap is around 8.1MM and the finishing that will take place on the top cap and ring will be sanded from 800grid to 7000grid and polished to high gloss finishing. Furthermore, all sides of the top cap will be engraved specially, and to top it off there will be many types of rings produced for the outer look appearances of the bridge. What’s even nicer is that I get to see my face through the reflection of the high gloss finish on the top cap whenever I fill my juice via boro.

Specs: 

• All parts are made from SS316 and the insulators are made from peek
• Air Flow Pin (MTL to RDL to DL) 8 pins provided: 0.8MM – 1.1mm – 1.4mm – 1.7mm – 2mm – 2.3mm – 2.6mm – 3mm