HEIR RBA

Heir RBA

The Heir is rebuildable atomizer for Billet Box Boro, it is a bridge made by Ground Kloud Innovation in the Philippines. Its single coil deck with clamps is very easy to use. The Heir has a 510 pin facilitating the mounting of the coils. The airflow adjustment is located at the pin using a rotating ring but also with the installation of inserts provided.

Learn more in their Facebook group.

Ground Kloud Innovation or GKI, offers us here a Bridge for Boro Rev4, complete and easy to live with..

The Deck

It is a single coil work platform with opposite stud clamps, fitted with a central air outlet. The placement of the resistance is done with great simplicity. The Heir Deck will accept coils with a maximum external diameter of 5 mm. The connection pin is equipped with a 510 thread, an ideal option to stabilize the resistances on a box or a Tab without additional accessories.

Airflow side

On the menu of inserts and an airflow control ring! Indeed, The Heir is equipped with a notched ring allowing to regulate the airflow at the entry of the connection pin. You will also find three inserts to screw on the air outlet of 2.9 mm in the center of the deck. These inserts are drilled to 0.8 mm, 1.2 mm, and 2.5 mm. These two systems can be combined for a fine configuration of your vape. Note that the ring cannot be used with boro or anti-condensation plugs.

Composition and installation

The Heir consists of three parts; the deck, the chamber and the chimney. For installation, you must first insert the chimney from the inside to the outside, then do the same with the base and the chamber clipped together. Finally push the assembly so that all the pieces come together. For extraction, just think of emptying the Boro, then a good push on the pin 510, and voila.

Package content

• 1 atomizer The Heir Bridge
• 3 inserts (0.8 mm, 1.2 mm, 2.5 mm)
• 1 spare kit (2 screws, 3 seals)